At Dringstone we keep on stock all the standard sizes of Sandstone and Limestone but are happy to cut non standard within an agreed timescale. Below are the popular types of walling available at our yard.

Tumbled Walling
Available in Sandstone and Limestone, standard course heights of 100mm, 140mm, 180mm and 100mm/115mm on bed all by random lengths. Non standard sizes available to order.

Pitch Faced Walling
Available in Sandstone and Limestone, with standard course heights of 100mm, 140mm, 180mm and 215m all at 100mm/115mm on bed with random lengths. Non standard sizes are available to order.

Split Faced Walling
Available only in Sandstone and only available to order. This is sold
as random course heightsand random lengths and 100mm/125mm on
bed. Also available in split face is coursed walling which is available in
Sandstone and Limestone 100mm, 140mm and 180mm x random
lengths x 100mm/115mm on bed.

Six Sided Sawn Walling
This is available in Sandstone and Limestone and is only cut to order. Please note that this has a smooth finish on all 6 sides but is not polished.

Ashlar Walling
This is available in Sandstone and Limestone and again is only cut to order. Ashlar walling is Sawn Six Sides and has a polished face.

Dringstone can supply a range of other walling finished like cottage faced, punched and herringbone. These are not usually stock items and are made to customer individual requirements.

Random Walling
Available in Sandstone and Limestone, this is sold by the tonne and comes as random course heights x random lengths x random on bed. These can also be backed off as required.

Reclaimed Walling
This can include Delph, Punched and herringboned and stocks change regularly. Customers requiring this are advised to ring the office and
check the availability.

All of our Profiling and Masonry services are made to individualcustomer requirements, from a single Cill or step to a full house or housing development. Below is a selection of pieces that are ordered regularly.

Heads and Lintels
As with all other masonry these are cut to order. They normally work into
a course height of either brick or stone and sit on a catnic as they are
not load-bearing. They come standard as six sided sawn but can have
a keystone or be moulded shaped or profiled.

Cills
Standard profiles for cills are either straight chamfered or stooled ended.
Again they usually work in a course of either bricks or stone.

Jambs and Mullions
They are all bespoke and are cut to order. Six sided
sawn or profiled and chamfered.

Quoins - Square cut or bevelled

Kneelers - Profiled

Water Table - Six Sided Sawn or Chamfered

Plinth Course - Square cut or chamfered

House Names/Numbers - Available in a large range of phonts and sizes.

Other items would include Columns and Porticos.

Coping comes in a variety of shapes and sizes and can be cut
and profiled to match up to existing or designed to suit.

Six Sided Sawn
This is just smooth on all sides sold in a range of thickness
and widths and usually comes in random lengths.

Chamfered, Hogged Back, Apexed etc
This is all cut to order.

Hedgehogs
Hedgehogs are individual stones cut to stack on top
of a wall to form a traditional run of coping.

Steps
Steps can be cut six sided sawn or bull nosed. As with the coping
steps are all cut to order and customers specification.

New and tumbled
They come in an average of 140mm wide x random lengths
and in a variety of widths; 50mm, 66mm and 75mm.

Fireplaces
At Dringstone Ltd we offer a made to measure service on all our Bespoke Fireplaces and Hearths. We use Sandstone and Limestone sourced from local Quarries as well as Quarries from Lincolnshire, Lancashire, West Riding and Cumbria. Fireplaces and Hearths can have profiles, bevells, moulds or Bullnoses on. Alternatively just left six sided sawn. Fireplaces
can also be cut from Reclaimed stone and sandblasted

Steps
Square cut, half bullnose or full bullnose.

Flags
A variety of indoor flooring available with both riven
and sawn finishes, in a variety of sizes.

Delph
Sandstone with a flat face and a natural bed. Usual course height
is between 2" and 5" and backed off to 5" on bed.

Parallel Punched
Sandstone with a flat face and approx 1/2" punch mark.
Course heights vary from 5"- 12".

Random Reclaimed Sandstone
A random range of stone with a wide variety of
uses from walling to rockery stone.

Limestone
Random course height with either a cropped or random bed.

Other reclaimed walling is available please ring the office for more details.
Samples and metre panels are available on all the walling we supply.

We also Stock a large range of Reclaimed Steps, Ridging, Coping,
Quions etc to compliment the different walling.